PLAZMA NİTRÜRLEMENİN SERT METAL PLAKETLERDE SÜRTÜNME KATSAYISINA ETKİSİ

Authors

  • Ufuk Özdemir
  • Muzaffer Erten

Keywords:

Plasma (Ion) Nitriding, HM Tool Insert, Tribology, Friction

Abstract

Plasma (ion) nitriding is one of the widely used advanced surface hardening method applied especially to steels.
It has been used for some components were used in the automotive industry, and in cutting tools manufacturing.
Plasma nitriding has been particulary effective in improving their wear resistances and lives by improving
surface hardnesses of these components and tools. It ıs known that hardness of cutting tools is most important
parameter in metal cutting, and friction coefficient is coming after that. In this paper it is aimed to investigate
the effect of different parameters of plasma nitriding such as nitriding temperature, nitriding time and gas
mixture ratio on friction coefficient. A choosen type of an hard metal (cemented carbur) tool insert plasma
nitrided at different parameters, and then friction coefficients were measured at same conditions and results
were evaluated.

Downloads

Download data is not yet available.

References

[1] Özdemir, U., Erten, M., “Plazma (İyon)
Nitrürleme Yöntemi ve Malzeme Özellikleri
Üzerindeki Etkisi”, Havacılık ve Uzay
Teknolojileri Dergisi, Sayı 2 (41-48), Temmuz
2003.
[2] Karamış, M.B., Gerçekcioğlu, E., “Wear
behaviour of plasma nitrided steels at ambient
and elevated temperatures”, Wear, 243, 76-84,
2000.
[3] Karamış, M.B., “Wear properties of steel
plasma nitrided, at high temperatures”, Materials
Science and Engineering, 168, 49-53, 1993.
[4] Karamış, M.B., “Tribological behaviour of
plasma nitrided 722M24 material under dry
sliding conditions”, Wear, 147, 385-399, 1991.
[5] Karamış, M.B., “An investigation of the
properties and wear behaviour of plasma-nitrided
hot-working steel (H13)”, Wear, 150, 331-342,
1991.
[6] Lee, C.K. and Shih, H.C., “Structure and
corrosive wear resistans of plasma nitrided alloy
steels”, Corrosion, 50, 848-856, 1999.
[7] Lei, M.K., Wang, P., Huang, Y., Yu, Z.W.,
Yuan, L.J. and Zhang, Z.L., “Tribological
studies of plasma source ion nitrided low alloy
tool steel”, Wear, 209, 301-307, 1997.
[8] Peng, Q.F., “Improving abrasion wear by
surface treatment”, Wear, 129, 195-203, 1989.
[9] Batista, J.C.A., Joseph, M.C., Goday, C.,
Matthews, A., “Micro-abrasion wear testing of
PVD TiN coating on untreated and plasma
nitrided AISI H13 steel”, Wear, 249, 971-979,
2002.

Downloads

Published

26-01-2004

How to Cite

[1]
U. Özdemir and M. Erten, “PLAZMA NİTRÜRLEMENİN SERT METAL PLAKETLERDE SÜRTÜNME KATSAYISINA ETKİSİ”, JAST, vol. 1, no. 3, pp. 29–38, Jan. 2004.

Issue

Vol. 1 No. 3 (2004)

Section

Articles

License

The manuscript with title and authors is being submitted for publication in Journal of Aeronautics and Space Technologies. This article or a major portion of it was not published, not accepted and not submitted for publication elsewhere. If accepted for publication, I hereby grant the unlimited and all copyright privileges to Journal of Aeronautics and Space Technologies.

I declare that I am the responsible writer on behalf of all authors.